RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Camshaft: Removal and Replacement
Camshaft - Removal
CAMSHAFT - REMOVAL
1. Disconnect both negative battery cables.
2. Remove the engine cover.
3. Recover A/C refrigerant (if A/C equipped) See: Heating and Air Conditioning/Service and Repair/Refrigerant System Recovery.
4. Drain engine coolant See: Cooling System/Service and Repair.
5. Remove radiator upper hose.
6. Remove viscous fan/drive/shroud assembly See: Cooling System/Radiator Cooling Fan/Service and Repair/Removal and Replacement/Cooling
Fan - Removal.
7. Disconnect the coolant recovery bottle hose from the radiator filler neck.
8. Disconnect lower radiator hose from radiator outlet.
9. On automatic transmission equipped models, disconnect transmission oil cooler lines from radiator.
10. Remove radiator mounting screws and lift radiator out of engine compartment.
11. Remove upper radiator support panel.
12. If A/C equipped, disconnect A/C condenser refrigerant lines.
13. Disconnect charge air cooler piping from the cooler inlet and outlet.
14. Remove the two charge air cooler mounting bolts.
15. Remove charge air cooler (and A/C condenser if equipped) from vehicle.
16. Remove the power steering pump and position aside.
17. Remove accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Serpentine Accessory Drive Belt
- Removal.
