RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
RH Engine Mount
2. With engine raised SLIGHTLY, install the RH mount (2) to engine. Tighten bolts (1) to 95 Nm (70 ft. lbs.).
Frame Mounts
3. Lower the engine support fixture tool 8534B, while guiding the mount and thru-bolt into the frame mounted brackets.
4. Install the thru-bolt nut (1). Tighten nut (1) to 129 Nm (95 ft. lbs.).
5. Remove the engine support fixture tool 8534B.
6. Install the viscous fan/drive assembly See: Cooling System/Radiator Cooling Fan/Service and Repair/Removal and Replacement/Cooling Fan -
Installation.
7. Connect both negative battery cables.