RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Exhaust Pipe: Service and Repair
Exhaust Pipe - Removal
6.7L DIESEL
1. Raise and support the vehicle on a hoist.
2. Saturate the bolts and nuts with heat valve lubricant. Allow 5 minutes for penetration.
3. Remove the exhaust pipe-to-DOC/DPF flange nuts (2).
4. 4X4 Vehicles - Remove transfer case skid plate .
5. 4X4 Vehicles - Remove transmission crossmember. See: Body and Frame/Frame/Cross-Member/Service and Repair/Crossmember - Removal
6. Remove the exhaust pipe-to-turbocharger clamp (5) and discard.
7. Remove the transmission mounted exhaust pipe support (4).
8. Separate the exhaust pipe (3).
9. Remove exhaust pipe (3).
