RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Return Hose - Reservoir to Cooler - I.F.S.
RETURN HOSE - RESERVOIR TO COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose at the cooler.
3. Reattach the hose to the routing clip at the fan shroud.
4. Remove the support and lower the vehicle.
5. Reconnect the return hose at the reservoir.
6. Refill the power steering system, See: Steering and Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair/Procedures.
Return Hose - Gear to Cooler - Link and Coil
RETURN HOSE - GEAR TO COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose at the cooler.
3. Reconnect the return hose (2) at the gear. Tighten the hose to 51 Nm (38 ft. lbs.).
4. Reattach the hose to the routing clip at the fan shroud.
5. Remove the support and lower the vehicle.
6. Refill the power steering system, See: Steering and Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair/Procedures
Pressure Hose - Link and Coil
PRESSURE HOSE
