RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Intake Air Temperature Sensor: Service and Repair
Intake Air Temperature Sensor - Installation (Cab/Chassis)
CAB/CHASSIS MODELS
1. Check condition of sensor O-ring.
2. Clean sensor mounting area at intake manifold.
3. Lubricate sensor O-ring and sensor mounting hole in intake manifold cover with clean engine oil.
4. Position sensor (4) into intake manifold.
5. Install and tighten sensor mounting screw (5) to 1 Nm (9 in. lbs.) torque.
6. Connect electrical connector (3) to sensor.