RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Oxygen Sensor: Service and Repair
Oxygen Sensor - Installation
INSTALLATION - PICK UP MODELS
O2S SENSOR
NOTE:
Threads of NEW Oxygen (O2) sensors are factory coated with anti-seize compound to aid in removal.DO NOT add any additional
anti-seize compound to threads of a new oxygen sensor. Be careful not to get anti-seize compound on sensor tip.
1. Inspect the O2 sensor wiring boot for cuts, tears or damage.
2. If the O2 sensor (2) is going to be reinstalled, apply pressurized shop air directly into center hole (1) of O2 sensor.
3. Wipe excess soot off the O2 sensor (2) with a soft cloth.