RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
12. 4X4 Vehicles - If equipped, install transfer case skid plate.
13. Tighten the DOC/DPF to turbocharger clamp to 17 Nm (13 ft. lbs). Using a rubber mallet, hit the DOC/DPF to turbocharger clamp three times
around the perimeter of the clamp and tighten the clamp to 17 Nm (13 ft. lbs).
14. Connect electrical connectors.
15. Connect negative battery cable.
16. Using scan tool, under ENGINE MISC. FUNCTIONS, perform RESET REGENERATIVE FILTER TIMERS function.
