dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Vehicle Theft Security Hood Ajar Switch - Removal|Page 211 > < Vehicle Theft Security Hood Ajar Switch - Removal
Page 2
background image

1. Unlatch and open the hood.
2. Disconnect and isolate the battery negative cable.
3. From the top of the mounting bracket (3) on the right front load beam (6), squeeze the two hood ajar switch (2) latch tabs together and pull the

switch upward.

4. Pull the hood ajar switch up through the hole in the mounting bracket far enough to access and disconnect the jumper wire harness connector (5)

from the switch connector receptacle.

5. Remove the hood ajar switch from the mounting bracket.

Vehicle Theft Security Hood Ajar Switch - Removal|Page 211 > < Vehicle Theft Security Hood Ajar Switch - Removal