RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
clockwise rotation. Use a dial-type or beam-type wrench. Tighten in the counterclockwise rotation and tighten to 110 Nm (81 ft. lbs.).
6. Install the accessory drive belt and generator See: Generator - Installation.
7. Connect the negative battery cable.
Litens Decoupler
1. Thread the decoupler pulley onto the generator shaft by hand (right-hand threads).
2. Position the Special Tool 8433A into decoupler. Align the tool to hex end of the generator shaft.
3. Do not use an adjustable, ratcheting "click type" torque wrench. Most "click type" wrenches will only allow torque to be applied in a
clockwise rotation. Use a dial-type or beam-type wrench. Tighten in the counterclockwise rotation and tighten to 110 Nm (81 ft. lbs.).
4. Install the accessory drive belt, and generator See: Generator - Installation.
5. Connect the negative battery cable.
