RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Battery Temperature Sensor: Service and Repair
Battery Temperature Sensor - Removal
REMOVAL
The battery temperature sensor (1) is located under the vehicle battery and is attached (snapped into) a mounting hole on battery tray (4).
1. Remove the battery. See: Battery/Service and Repair/Removal and Replacement/Battery - Removal.
2. Pry sensor (1) straight up from battery tray mounting hole to gain access to electrical connector (3).
3. Disconnect sensor from engine wire harness electrical connector.
