RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
6. Remove starter motor from engine. Note: Certain diesel engines use an aluminum spacer. Note position and orientation of spacer before removal.
6.7L Diesel
1. Disconnect and isolate both negative battery cables at both batteries.
2. Raise and support vehicle.
3. Disconnect solenoid electrical connector (3).
4. Remove battery cable mounting nut (2).
5. Remove battery cable (1) from stud.
6. Remove three starter mounting bolts (4).
7. Remove starter motor from engine.