RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Control Arm: Service and Repair
Lower Control Arm - Removal
REMOVAL
1. Raise and support the vehicle.
2. Paint or scribe alignment marks on the cam adjusters (1) and control arm (4) for installation reference.
NOTE: Discard the nuts and bolts and do not reuse, New nuts and bolts should be used when replacing or servicing the control arms.
3. Remove the lower control arm nut, cam and cam bolt from the axle (3).
4. Remove the nut and bolt from the frame rail bracket (1) and remove the lower control arm (2).
