RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Control Arm: Service and Repair
Upper Control Arm - Installation
Link and Coil Front Suspension - Left
LEFT
NOTE: Discard the nuts and bolts and do not reuse. New nuts and bolts should be used when replacing or servicing the control arms.
1. Position the upper control arm (4) at the axle and frame rail.
2. Install the bolts and finger tighten the nuts.
3. Remove the supports and lower the vehicle.
4. Tighten the nut at the axle bracket and at the frame bracket to specifications See: Specifications/Front Suspension Specifications.
Link and Coil Front Suspension - Right
RIGHT
NOTE: Discard the nuts and bolts and do not reuse. New nuts and bolts should be used when replacing or servicing the control arms.
1. Position the upper control arm (2) at the axle and frame rail.
