RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
SOLENOID FILTER SCREEN
Inspect all solenoid filter screens (1).
Inspect all the fluid seals in the transmission case. Replace any seals that are cracked, distorted, or damaged in any way. These seals pass fluid pressure
directly to the clutches. Any pressure leak at these points, may cause transmission performance problems.
Valve Body - Assembly
ASSEMBLY
NOTE: Apply petroleum grease to all slide portions, rolling contacts surfaces, thrust surfaces etc. to prevent burnout during initial operation.
Lubricate O-rings and O-ring seals with MOPAR(R) AS68RC ATF. Soak all friction disks in MOPAR(R) AS68RC ATF for at least
two hours before assembly of clutch packs.