RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Power Window Switch: Service and Repair
Power Window Switch - Removal
REMOVAL
FRONT PASSENGER
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Removal.
3. Remove the switch from the trim panel bezel.
REAR PASSENGER
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Removal.
3. Gently pry switch from door trim panel.