RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
Windshield Washer Spray Nozzle: Service and Repair
Washer Nozzle - Removal
REMOVAL
1. Remove both wiper arms from the wiper pivots. See: Wiper Arm/Service and Repair/Wiper Arm - Removal.
2. Unlatch and open the hood.
3. Remove the cowl plenum cover/grille panel from over the cowl plenum. See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and
Repair/Cowl Panel Cover - Removal.
4. From the underside of the cowl plenum cover/grille panel (1), disconnect the washer nozzle hose from the barbed nipple (3) of the washer nozzle.
5. From the underside of the cowl plenum cover/grille panel, release the integral latch features (6) of the washer nozzle and push the nozzle out
through the mounting hole toward the top side of the cowl plenum cover/grille panel.
6. Remove the washer nozzle from the top of the cowl plenum cover/grille panel.
