RAM 3500 Chassis Cab Truck 2WD V8-5.7L (2011)
8. Remove and discard the access hole knock-out tab. This will give you access to the rear window glass release tab (Figure 8).
9. Move the window upward until the release tabs can be seen in the knock-out tab holes.
10. Unsnap the window glass from the window regulator and slide the glass all the way up. Then use tape to hold the glass in place.
11. Disconnect the outside door handle link rod at the door latch.
12. Remove the two wiring harness rubber grommet mounting screws (Figure 9).
13. Unsnap the door wiring harness rubber grommet from the "B" post and then disconnect the door wiring electrical connector from the body wiring
harness.
14. Remove and save the three door latch retaining screws (Figure 10).
15. Remove and save the 11 carrier plate mounting bolts.
16. Remove the carrier plate from the door shell.
