RAM 3500 Chassis Cab Truck 2WD V8-5.7L (2011)
10. Unsnap the window glass from the window regulator and slide the glass all the way up (Figure 13). Then use tape to hold the glass in place.
11. Disconnect the door wiring electrical connector from the body wiring harness located under the instrument panel.
12. Unhook the door check strap from the body hook.
13. Remove the door check strap anchor from the door.
14. Unclip the door wiring harness from the door.
15. Disconnect the mirror electrical connector from the door wiring harness.
16. Remove and save the three door latch retaining screws.
17. Remove the black rubber access plug from the door shell (Figure 14).
18. Remove the 8 mm nut located behind the black rubber access plug that was removed in the previous step.
19. Remove the 11 carrier plate mounting bolts.
