RAM 3500 Chassis Cab Truck 2WD V8-5.7L (2011)
14. Remove the two mounting screws for the door wiring harness rubber grommet (Figure 4).
15. Unsnap the door wiring harness rubber grommet from the "A" pillar and then disconnect the door wiring electrical connector from the body harness
(Figure 5).
16. Remove and save the three door latch retaining screws.
17. Disconnect the outside door handle link rod at the door latch.
18. Remove the 12 carrier plate mounting bolts (Figure 5).
19. Carefully remove the carrier plate from the door shell.
