RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Rear Bumper: Service and Repair
Installation
INSTALLATION
1. Align the holes in the bumpers to the trailer hitch pins and install the bumper.
2. Loosely install the hitch bolts (2) in the support bracket (4).
3. Install the front upper edge to the trailer hitch bolts (2) and tighten to 54 Nm (40 ft. lbs.).
4. Install the license plate reinforcement to hitch bolts (2) and tighten to 54 Nm (40 ft. lbs.).
5. Tighten the left bumper bracket bolts (3) to 54 Nm (40 ft. lbs.).
6. Tighten the right bumper bracket bolts (3) to 54 Nm (40 ft. lbs.).
7. Connect the trailer light connector electrical connection (if equipped).
8. Connect the license plate light electrical connectors.
9. Install the license plate.