RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
4. Install the cowl trim panel (1) See: Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim/Cowl Trim - Installation
NOTE: When installing a new weatherstrip on the front door opening, remove the tear strip starting at the splice and moving around the
front of the door to the back of the opening.
REAR DOOR SEAL
1. Position the rear door seal to the bottom of the door opening, with bulb facing outboard, starting the installation at the center of the lower flange.
Press the seal onto the sill flange and work around the perimeter of the door opening until fully seated. Work in one direction, smoothing the seal
to avoid puckers or wrinkles.
