RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Trim Panel: Service and Repair
Front Door Trim Panel
Front Door Trim Panel - Removal
REMOVAL
1. Remove the screw (1) that secures the interior door handle (2) to the interior door handle actuator (3).
2. Remove the interior door handle from the interior door handle actuator.
3. If equipped, remove the manual window crank (1) using a window crank removal tool (2).
4. Remove the two screws (2) that secure the door trim panel (3) to the two screw inserts (1).
5. Remove the two screws (4) that secure the door trim panel to the bottom of the door.
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not
pull the door trim panel directly off of the door or damage to the trim panel and/or the power switch assembly will occur.
