RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
1. Position the locating tab of the A-pillar trim panel (2) into the slot located in the top of the instrument panel.
2. Install the A-pillar trim panel onto the A-pillar (1) and install the two bolts (4). Tighten the bolts to 6 Nm (55 in. lbs.).
3. Close the two fastener covers (3) located in the A-pillar trim panel.
Removal
REMOVAL
REGULAR CAB
1. Remove the cowl trim panel See: Cowl Trim/Cowl Trim - Removal .
2. Remove the upper B-pillar trim panel See: Pillar Trim/B-Pillar Trim .
3. Remove the bolt (2) that secures the seat belt (1) to the bottom of the B-pillar (4) and position the seat belt out of the way.
4. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower B-pillar trim panel (3) to the B-pillar.
5. Remove the seat belt from the lower B-pillar trim panel through the slot provided and remove the trim panel.
QUAD CAB
