RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
1. Route the seat belt (2) through the slot in the lower C-pillar trim panel (1) and position the trim panel to the C-pillar (4).
2. Engage the retaining tabs that secure the lower C-pillar trim panel to the C-pillar.
3. Install the bolt (3) that secures the seat belt to the bottom of the C-pillar. Tighten the bolt to 40 Nm (30 ft. lbs.).
4. Install the upper C-pillar trim panel See: Pillar Trim/C-Pillar Trim Panel-Installation .
Upper
INSTALLATION
1. Position the upper C-pillar trim panel (5) to the C-pillar (4).
2. Engage the retaining tabs that secure the upper C-pillar trim panel to the C-pillar.
3. Install the bolt (2) that secures the seat belt (3) to the top of the C-pillar. Tighten the bolt to 40 Nm (30 ft. lbs.).
4. Install the cap (1) onto the seat belt.
Removal
REMOVAL
