RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Utility Storage Compartment: Service and Repair
Under Seat Storage Bin Lid - Removal
REMOVAL
NOTE: Do not reuse the seat fasteners, always replace with new ones.
1. Open the center seat cushion/storage bin.
2. Position the seat cushion cover aside, remove the hinge bolts (2) and discard.
3. Remove the seat cushion (4).
Under Seat Storage Bin Lid - Installation
INSTALLATION
NOTE: Do not reuse the seat fasteners, always replace with new ones.
1. Position the center seat cushion (4) on the hinges (3) and install new bolts (2).
2. Tighten the bolts (2) to 20 Nm (15 ft. lbs.).
3. Position the cushion cover back over the hinges.
Under Seat Storage Bin - Removal
REMOVAL
