RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Installation
INSTALLATION
1. Align the tabs of the switch/module to the instrument panel center bezel and gently push together until the tabs are securely in place.
2. Connect the switch/module electrical connectors.
3. Install the instrument panel center bezel, See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Center
Bezel - Installation .
4. Connect the battery negative cable.
5. Verify heated seat system operation.
