RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Brake Pedal Assy: Service and Repair
Removal
REMOVAL
NOTE: The brake pedal is serviced as a complete assembly including accelerator pedal and the bracket.
1. Disconnect the negative battery cable.
2. Remove the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal .
3. Remove the brake lamp switch and discard See: Lighting and Horns/Brake Light Switch/Service and Repair/Removal .
4. On vehicles equipped with adjustable pedals. Disconnect the adjuster cable (1) to the pedal (2).
5. Remove the steering column See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column - Removal .
6. Remove the brake booster (5) See: Power Brake Assist/Vacuum Brake Booster/Service and Repair/Removal See: Power Brake Assist/Hydraulic
Brake Booster/Service and Repair/Removal and Replacement/Removal .
7. Disconnect the electrical connectors.
8. Remove the module mounting bolts.
9. Disconnect the accelerator pedal cable.
10. Remove the pedal assembly mounting nuts/fasteners (4).
