RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Drive Belt Tensioner: Service and Repair
Accessory Drive Belt Tensioner - Installation
6.7L DIESEL
1. Install tensioner assembly (7) to water inlet bracket. A dowel is located on back of tensioner. Align this dowel to hole in tensioner mounting
bracket. Tighten bolt to 43 Nm (32 ft. lbs.) torque.
2. Install drive belt See: Drive Belt/Service and Repair/Removal and Replacement/Accessory Drive Belt - Installation .
