RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
4. Install screen assembly into housing and tighten fitting (3) to 20 ft. lbs. (27 Nm).
5. Connect quick connect fuel supply line (1) to fitting (3).
6. Fuel Heater Element:
a. Check condition of O-ring (2).
b. Lubricate new element O-ring before installation.
7. Install fuel heater element (3) into fuel filter housing (4).
8. Install two fuel heater mounting screws (3) and tighten to 60 in lbs. (6.8 Nm).
9. Connect electrical connector (1).
10. Fuel Filter Head (Housing):
