RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
2. Install water pump with the weep hole facing downward. Tighten mounting bolts to 24 Nm (18 ft. lbs.) torque.
3. Install generator assembly.
4. Install accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Accessory Drive Belt - Installation .
5. Install air box and tube assembly. For 5.9L Diesel, See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air
Cleaner Housing - Installation . For 6.7L Diesel, See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air
Cleaner Housing - Installation .
6. Install air filter housing See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Housing -
Installation .
7. Fill cooling system See: Cooling System/Service and Repair .
8. Connect both battery cables.
9. Start and warm the engine. Check for leaks.
