RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
NOTE: If the seals on the air doors is deformed or damaged, the air doors must be replaced.
28. Remove the blend-air doors from the blend door plates.
29. Remove the defroster-air doors (1) from the lower half of the HVAC housing (2) by carefully release the retaining tabs of actuator coupler (3)
located on the inside surface of the housing and pull the actuator coupler out of the pivot shaft of the defroster-air doors.
NOTE: If the seals on the air doors is deformed or damaged, the air doors must be replaced.
30. Remove the defroster-air doors from the HVAC housing.
NOTE: If the foam seal for the A/C evaporator tubes is deformed or damaged, the seal must be replaced.
31. Remove the foam seal (1) from around the tubes of the A/C evaporator (3).
32. Carefully lift the A/C evaporator out of the upper half of the HVAC housing (2).
Air Inlet Housing
AIR INLET HOUSING
NOTE: The air inlet housing must be removed from HVAC housing and disassembled for service of the recirculation-air door.
