RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Compass Variance Adjustment - EVIC
COMPASS VARIANCE ADJUSTMENT
Compass variance, also known as magnetic declination, is the difference in angle between magnetic north and true geographic north. In some geographic
locations, the difference between magnetic and geographic north is great enough to cause the compass to give false readings. If this problem occurs, the
compass variance must be set.
NOTE: If the vehicle is taken on long trips into a new variance zone the compass function may be effected. Compass variance may need to be
adjusted to the new zone number to function properly.
NOTE: The default for the compass variance from the factory is 8.
To set the compass variance:
1. Using the Variance Settings Map, find your geographic location and note the zone number.
2. Turn the ignition switch to the On/Run position. Press and release the MENU push button (1) until "Personal Settings" is displayed.
3. Press the STEP push button (4) until "Compass Variance" is displayed.
4. Momentarily depress and release the RESET push button (2) to toggle through the zone numbers (1-15), until the zone number for your
geographic location appears in the display.
5. Momentarily depress and release the C/T push button (5) to enter the displayed zone number into the compass unit memory.
6. Confirm that the correct directions are now indicated by the compass.
Electronic Vehicle Information Center
PERFORM SERVICE INDICATOR - RESET
