RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Fog/Driving Lamp Bulb: Service and Repair
Removal
BULB
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
1. Disconnect and isolate the battery negative cable.
2. Reach under and behind the front fascia to access the front fog lamp housing (1) on the back of the front bumper (4).
3. Disconnect the wire harness connector (3) from the fog lamp bulb (2).
4. Firmly grasp the bulb on the back of the housing and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the bulb straight out from the keyed opening in the housing.
