RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
NOTE: Each front wheel should be adjusted for one-half of the total toe position specification. This will ensure the steering wheel will be
centered when the wheels are positioned straight-ahead.
3. Adjust the wheel toe position by turning the inner tie rod (2) as necessary.
4. Tighten the tie rod jam nut (1) to 127 Nm (94 ft. lbs.).
NOTE: Make sure the toe setting does not change during tightening.
5. Verify the specifications
6. Turn off engine.
