RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Accessory Drive Belt - Installation
6.7L DIESEL
Belt Routing - DIESEL WITH A/C
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating
in wrong direction.
1. Position drive belt over all pulleys except water pump pulley.
2. Attach a suitable tool to the accessory drive belt tensioner.
Belt Routing - DIESEL WITHOUT A/C
3. Rotate accessory drive belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove tool. Be sure belt
