RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
a. Install fuel filter head to cylinder head. Tighten bolts to 32 Nm (24 ft. lbs.) torque.
b. Replace sealing washers on banjo bolts and install all low-pressure fuel lines to filter housing. Tighten banjo bolts to 24 Nm (18 ft. lbs.)
torque. Tighten quick-connect fitting to 27 Nm (20 ft. lbs.) torque.
c. If equipped, install transmission dipstick tube to filter housing. Tighten bolt to 10 Nm (8 ft. lbs.) torque.
