dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Control Module (ECM) - Diesel|Page 4875 > < Engine Control Module (ECM) - Diesel|Page 4873
Page 3
background image

-

Governor pressure (VFS solenoid)

-

Intake manifold air heater relays #1 and #2 control circuits

-

CAN C BUS (+/-) circuits for: speedometer, voltmeter, fuel gauge, oil pressure gauge/lamp, engine temp. gauge and speed control warn. lamp

-

Malfunction indicator lamp (Check engine lamp). Driven through J1850 circuits.

-

Oil pressure switch/warning lamp (databus)

-

Overdrive/3-4 shift solenoid (automatic transmission only)

-

SC source

-

SCI datalink bus (+) circuits

-

SCI datalink bus (-) circuits

-

Speed control vacuum solenoid

-

Speed control vent solenoid

-

Tachometer (if equipped). Driven through J1850 circuits.

-

TCC solenoid (automatic transmission only)

-

Transmission battery relay (automatic transmission only)

-

Transmission throttle valve actuator (automatic transmission only)

-

Transmission governor solenoid (automatic transmission only)

-

Wait-to-start warning lamp (databus)

-

Turbo wastegate solenoid

-

Water-In-Fuel (WIF) warning lamp (databus)

Engine Control Module (ECM) - Diesel|Page 4875 > < Engine Control Module (ECM) - Diesel|Page 4873