RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
ESC and 4 parts water. Allow cleaning solution to soak for 1 hour.
10. Remove assembly from cleaning solution. Completely remove remaining soot from valve stems, both valve seats, and both valve faces using a
small nylon scrubbing brush. Dispose of cleaning solution per local governmental regulations.
11. Rinse EGR valve housing in hot tap water until all cleaning solution is rinsed clean. Dry completely.
12. Assemble valve spring (2) and retainer (3) to housing.
13. Position valve keepers (2). Press down on retainer (3) until groves on valve keepers lock into valve stem (1).
