RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Turbo Boost Sensor: Service and Repair
Removal
REMOVAL
CAUTION: Do not use a screw driver or tool to pry sensor out of the turbocharger bearing housing. Damage to sensor may result. If sensor is
damaged during removal, install a new sensor.
1. Disconnect negative battery cable.
2. Remove turbocharger oil supply line.
3. Disconnect speed sensor electrical connector.
4. Remove turbocharger speed sensor mounting bolt (1).
5. Remove turbocharger speed sensor (2).
