RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
1. Fold the 60 percent section of the rear seat back (2) down onto the seat cushion in the cargo storage position, then lift and prop open the seat back
filler panel (3) as necessary for easiest access to the rear center seat belt lower anchor and right outboard buckle anchor bracket.
2. Remove the screw (7) that secures the center seat belt lower anchor to the anchor bracket (3) and, from the front of the seat back, pull the belt
lower anchor out from between the seat back (1) and the seat cushion (2).
3. Remove the two screws (3) that secure the bezel (2) to the top of the 60 percent section of the rear seat back (1).
4. Remove the bezel from the webbing of the rear center seat belt.
5. Remove the trim cover from the 60 percent section of the rear seat back. See: Body and Frame/Seats/Seat Back/Service and Repair/Seat Back
Cushion / Cover - Removal .
