RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Pedal Positioning Switch: Service and Repair
Installation
INSTALLATION
1. Install the switch (2) to the lower drivers side bezel (4) by pushing the switch inwards seating the retaining clips to the lower drivers side bezel (4).
2. Reconnect the electrical connector (3) to the adjustable pedal switch (2).
3. Install the lower drivers side bezel (4) See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Driver Side Bezel/Installation .
