RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removal
Removal-Cab/Chassis Models
REMOVAL-CAB/CHASSIS MODELS
The combination, dual function Intake Manifold Air Temperature Sensor/MAP (IAT/MAP) (4) sensor is installed into the top of the intake manifold.
1. Clean area around sensor.
2. Disconnect electrical connector (3) from IAT/MAP sensor.
3. Remove mounting screw (5).
4. Remove sensor from intake manifold.
5. Check condition of sensor O-ring.
Removal-Pick Up Models
REMOVAL-PICK UP MODELS
The combination, dual function Intake Manifold Air Temperature Sensor/MAP (IAT/MAP) (3) sensor is installed into the intake air connection
manifold, below, and to the rear of the EGR valve (5).
1. Clean area around sensor.
2. Disconnect electrical connector (2) from IAT/MAP sensor.
