RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
4. ......if splined, insert a 5/16" 6-point hex driver (1), or a 10MM 12-point triple square driver into tool #8823 (VM.1048).
5. Do not use an adjustable, ratcheting "click type" torque wrench. Most "click type" wrenches will only allow torque to be applied in a
clockwise rotation. Use a dial-type or beam-type wrench. Tighten in counterclockwise rotation and tighten to 110 Nm (81 ft. lbs.).
6. Install accessory drive belt, and generator.
7. Connect negative battery cable.
Litens Decoupler
1. Thread decoupler pulley onto generator shaft by hand (right-hand threads).
2. Position Special Tool 8433 into decoupler. Align tool to hex end of generator shaft.
3. Do not use an adjustable, ratcheting "click type" torque wrench. Most "click type" wrenches will only allow torque to be applied in a
clockwise rotation. Use a dial-type or beam-type wrench. Tighten in counterclockwise rotation and tighten to 110 Nm (81 ft. lbs.).
4. Install accessory drive belt, and generator.
5. Connect negative battery cable.
