RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Steering Wheel: Service and Repair
Installation
INSTALLATION
NOTE: Do not reuse the old steering wheel bolt (a new bolt must be used)
1. Install steering wheel to the column
NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring
operation.
2. Install the new steering wheel bolt. Tighten the bolt to 61 Nm (45 ft. lbs.).
3. Install the driver's side air bag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver Airbag -
Installation .
