RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
4. Remove the stabilizer bar link nuts from the axle brackets.
5. Remove the links (2) from the axle brackets with Puller C-3894-A (1).
Stabilizer Link With Disconnecting Stabilizer Bar - Link/Coil
STABILIZER LINK WITH DISCONNECTING STABILIZER BAR
1. Raise and support the vehicle.
2. Hold the stabilizer link (1) shafts with a wrench and remove the link nuts (3) at the stabilizer bar (2).
3. Remove the stabilizer bar link nuts from the axle brackets (2).
4. Remove the links (1) from the axle brackets (2) with Puller 9360 (3).
