RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Overdrive Switch: Service and Repair
48RE (A-618) 4 Speed
Removal
REMOVAL
1. Using a plastic trim tool, remove the tow/haul overdrive off switch retainer (2) from the shift lever (1).
2. Pull the switch (2) outwards to release it from the connector in the lever (1).
Installation
INSTALLATION
NOTE: There is enough slack in the wire to pull out the connector from the lever.
1. Pull the connector (2) out of the lever (1) just enough to grasp it.
CAUTION: Be careful not to bend the pins on the tow/haul overdrive off switch. Use care when installing the switch, as it is not indexed,
and can be accidentally installed incorrectly.
