RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
4. Slide cable off attachment stud on throttle body lever.
5. Compare position (B) of cable end to attachment stud on throttle body lever:
-
Cable end and attachment stud should be aligned (or centered on one another) to within 1 mm (0.039 in.) in either direction (B).
-
If cable end and attachment stud are misaligned (off center), cable will have to be adjusted as described in Throttle Valve Cable Adjustment
procedure.
6. Reconnect cable end to attachment stud. Then with aid of a helper, observe movement of transmission throttle lever and lever on throttle body.
-
If both levers move simultaneously from idle to half-throttle and back to idle position, adjustment is correct.
-
If transmission throttle lever moves ahead of, or lags behind throttle body lever, cable adjustment will be necessary. Or, if throttle body lever
prevents transmission lever from returning to closed position, cable adjustment will be necessary.
ADJUSTMENT PROCEDURE
