RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
Valve Body: Procedures
Cleaning
CLEANING
Clean the valve housings, valves, plugs, springs, transfer plate and separator plate with a standard parts cleaning solution only. Do not use gasoline,
kerosene, or any type of caustic solution.
Do not immerse any of the electrical components in cleaning solution. Clean the electrical components by wiping them off with dry shop towels only.
Dry all except the electrical parts with compressed air. Make sure all passages are clean and free from obstructions. Do not use rags or shop towels to
dry or wipe off valve body components. Lint from these materials can stick to valve body parts, interfere with valve operation, and clog filters
and fluid passages.
Inspection
INSPECTION
