RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)
5. Install the axle nut (3) and tighten to 356 Nm (263 ft. lbs.).
6. Install the wheel speed sensor 2) to the hub and tighten the bolt (1). See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Wheel Speed Sensor/Service and Repair/Front Wheel Speed Sensor - Installation .
7. Install the disc brake rotor (1). See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Installation .
8. Install the hub extension (2) and nuts to the front rotor. Tighten nuts to 130 Nm (96 ft.lbs).
9. Install the brake caliper adapter with the caliper, See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal
and Replacement/Disc Brake Caliper Adapter - Installation .
10. Install the wheel and tire assemblies, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement .
11. Remove the support and lower the vehicle.
12. Apply the brakes several times to seat the brake shoes and caliper piston. Do not move the vehicle until a firm brake pedal is obtained.
