dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Overdrive Switch, A/T > < Fluid Pressure Sensor/Switch, A/T|Removal

RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo (2008)

Page 1
background image

Fluid Pressure Sensor/Switch: Service and Repair
Installation

INSTALLATION

1. Install the line pressure sensor (2) into the transmission case.
2. Install the bolt to hold the line pressure sensor (2) into the transmission case. Tighten the bolt to 12 Nm (105 in.lbs.).
3. Install the wiring connector onto the line pressure sensor (2).
4. Verify the transmission fluid level. Add fluid as necessary.
5. Lower vehicle.

Overdrive Switch, A/T > < Fluid Pressure Sensor/Switch, A/T|Removal